[include beacon_sheets.cfg]

[beacon]
serial: /dev/serial/by-id/usb-Beacon_Beacon_RevD_A7B668494E4B333448202020FF0A0937-if00
x_offset: 0 # update with offset from nozzle on your machine
y_offset: 23 # update with offset from nozzle on your machine
mesh_main_direction: x
mesh_runs: 2

default_model_name: default

home_xy_position: 90, 90 # update with your bed center
home_z_hop: 3
home_z_hop_speed: 30
home_xy_move_speed: 25
home_method: contact # use proximity for induction homing
home_method_when_homed: proximity # after initial calibration use induction
home_autocalibrate: unhomed # contact will calibrate beacon on first home

home_gcode_pre_x: _HOME_PRE_AXIS AXIS=X
home_gcode_post_x: _HOME_POST_AXIS AXIS=X
home_gcode_pre_y: _HOME_PRE_AXIS AXIS=Y
home_gcode_post_y: _HOME_POST_AXIS AXIS=Y