final

dock_macros.cfg

@@ -317,7 +317,7 @@ variable_parameter_AREA_END : 0,0
 ; the clearance between print area and probe area 
 variable_mesh_area_offset : 5.0
 ; number of sample per probe point
-variable_probe_samples : 1
+variable_probe_samples : 3
 ; minimum probe count
 variable_min_probe_count : 3
 gcode:

moonraker.conf

@@ -2,6 +2,8 @@
 host: 0.0.0.0
 port: 7125
 enable_debug_logging: False
+
+[file_manager]
 config_path: ~/klipper_config
 log_path: ~/klipper_logs
 

print_start.cfg

@@ -18,9 +18,9 @@ gcode:
     
     # Homing and creating a mesh
     RESPOND PREFIX= MSG="Creating a mesh..."
-    M117 Creating a mesh...
+    #M117 Creating a mesh...
     G28
-    BED_MESH_CALIBRATE AREA_START={params.AREA_START} AREA_END={params.AREA_END}
+    #BED_MESH_CALIBRATE AREA_START={params.AREA_START} AREA_END={params.AREA_END}
     M104 S{extruderTemp} # Set extruder to printing temperature
     G90
     M83

printer.cfg

@@ -3,7 +3,7 @@
 [include print_start.cfg]
 [include print_end.cfg]
 [include calibration_macros.cfg]
-[include klipper-mini12864.cfg]
+#[include klipper-mini12864.cfg]
 [include dock_macros.cfg]
 [include timelapse.cfg]
 [pause_resume]
@@ -84,8 +84,9 @@ speed: 200
 horizontal_move_z: 7.5
 mesh_min: 25,35.0
 mesh_max: 225.0,220
-probe_count: 6,6
-algorithm: bicubic
+probe_count: 6
+algorithm: lagrange
+mesh_pps: 3
 fade_start: 1
 fade_end: 10
 fade_target: 0
@@ -99,6 +100,7 @@ speed: 25
 samples_result: median
 samples_tolerance: 0.05
 samples_tolerance_retries: 2
+samples: 3
 
 [extruder]
 max_extrude_only_distance: 100.0