From b684a0d0782fcce8baee0861bcb804a1bd9e5b5e Mon Sep 17 00:00:00 2001
From: Kyle Brown <kdb424@gmail.com>
Date: Sat, 26 Feb 2022 12:49:08 -0800
Subject: [PATCH] Basement fan is controller fan

---
 .gitignore             |  1 +
 calibration_macros.cfg |  2 +-
 printer.cfg            | 13 +++++++------
 3 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/.gitignore b/.gitignore
index 1bb3814..773da40 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,2 +1,3 @@
 printer-*.cfg
 .theme
+*.bkp
diff --git a/calibration_macros.cfg b/calibration_macros.cfg
index 433e528..150abb8 100644
--- a/calibration_macros.cfg
+++ b/calibration_macros.cfg
@@ -173,7 +173,7 @@ gcode:
 
 [gcode_macro TEST_Z_UP_MIDDLE]
 gcode:
-    TESTZ Z=-+
+    TESTZ Z=+
 
 [gcode_macro TEST_Z_DOWN_MIDDLE]
 gcode:
diff --git a/printer.cfg b/printer.cfg
index 1c42941..fde02e8 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -93,7 +93,7 @@ fade_target: 0
 pin: PC15
 x_offset: 0.0
 y_offset: 34.5
-z_offset = 6.500
+z_offset = 6.300
 speed: 25
 samples_result: median
 samples_tolerance: 0.05
@@ -130,13 +130,13 @@ uart_address: 3
 run_current: 0.6
 interpolate: False
 
-[heater_fan basement_fan]
+[controller_fan basement_fan]
 pin: PC14
 max_power: 1
 kick_start_time: 0.200
 shutdown_speed: 0
-heater: heater_bed
-heater_temp: 40.0
+idle_timeout: 30
+idle_speed: .3
 fan_speed: 0.6
 
 [heater_bed]
@@ -202,7 +202,7 @@ cs_pin: rpi:None
 kinematics: corexz
 max_velocity: 200
 max_accel: 7000
-max_accel_to_decel: 2500
+max_accel_to_decel: 3500
 max_z_velocity: 70
 max_z_accel: 7000
 square_corner_velocity: 8.0
@@ -248,6 +248,7 @@ probe_points:
 
 [input_shaper]
 shaper_type_x = mzv
-shaper_freq_x = 54.0
+shaper_freq_x = 51.0
 shaper_type_y = mzv
 shaper_freq_y = 48.8
+