kdb424/klipper_switchwire
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Purge line fix and purple

Browse source
This commit is contained in:
Kyle Brown 2022-01-01 11:44:24 -08:00
parent 8a20191f01
commit cdb6651b92
3 changed files with 43 additions and 39 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
klipper-mini12864.cfg
View file

@ -41,6 +41,6 @@ initial_BLUE: 0
[delayed_gcode setdisplayneopixel]
initial_duration: 1
gcode:
SET_LED LED=fysetc_mini12864 RED=.5 GREEN=0 BLUE=0 INDEX=1 TRANSMIT=0
SET_LED LED=fysetc_mini12864 RED=.05 GREEN=0 BLUE=0 INDEX=2 TRANSMIT=0
SET_LED LED=fysetc_mini12864 RED=.05 GREEN=0 BLUE=0 INDEX=3
SET_LED LED=fysetc_mini12864 RED=.25 GREEN=0 BLUE=.25 INDEX=1 TRANSMIT=0
SET_LED LED=fysetc_mini12864 RED=.05 GREEN=0 BLUE=.25 INDEX=2 TRANSMIT=0
SET_LED LED=fysetc_mini12864 RED=.05 GREEN=0 BLUE=.25 INDEX=3

13
print_start.cfg
View file

@ -39,9 +39,9 @@ gcode:
[gcode_macro LIGHT_DISPLAY]
gcode:
SET_LED LED=fysetc_mini12864 RED=.5 GREEN=0 BLUE=0 INDEX=1 TRANSMIT=0
SET_LED LED=fysetc_mini12864 RED=.05 GREEN=0 BLUE=0 INDEX=2 TRANSMIT=0
SET_LED LED=fysetc_mini12864 RED=.05 GREEN=0 BLUE=0 INDEX=3
SET_LED LED=fysetc_mini12864 RED=.25 GREEN=0 BLUE=.25 INDEX=1 TRANSMIT=0
SET_LED LED=fysetc_mini12864 RED=.05 GREEN=0 BLUE=.5 INDEX=2 TRANSMIT=0
SET_LED LED=fysetc_mini12864 RED=.05 GREEN=0 BLUE=.5 INDEX=3
[gcode_macro PRIME_LINE]
description: Print an easy to remove parametric extruder priming line with a built-in handle.
@ -75,9 +75,14 @@ gcode:
SAVE_GCODE_STATE NAME=STATE_PRIME_LINE
{% set saved_prime_line = (line.area_start_y - 40) %}
{% if saved_prime_line < -3 %}
{% set saved_prime_line = -3|int %}
{% endif %}
M117 Prime Line
G90 # absolute positioning
G0 X{line.area_start_x} Y{line.area_start_y - 40} Z{line.height} F{line.travel_speed * 60} # move to starting position
G0 X{line.area_start_x} Y{saved_prime_line} Z{line.height} F{line.travel_speed * 60} # move to starting position
M109 S{params.EXTRUDER_TEMP|float*0.98} # Wait until 98% of extruder temp is reached, then continue
M104 S{params.EXTRUDER_TEMP} # Set printing extruder temp
G91 # relative positioning

63
printer.cfg
View file

@ -93,7 +93,7 @@ fade_target: 0
pin: PC15
x_offset: 0.0
y_offset: 34.5
#z_offset = 6.163
z_offset = 6.628
speed: 25
samples_result: median
samples_tolerance: 0.05
@ -121,7 +121,7 @@ pid_kp = 27.402
pid_ki = 1.631
pid_kd = 115.090
min_temp: 0
max_temp: 300
max_temp: 350
[tmc2209 extruder]
uart_pin: PC11
@ -151,6 +151,21 @@ pid_kd = 1120.355
min_temp: 0
max_temp: 110
[thermistor chamber_temp]
temperature1: 10
resistance1: 100000
temperature2: 150
resistance2: 1074
temperature3: 300
resistance3: 82.78
[temperature_sensor chamber]
sensor_type: chamber_temp
#sensor_type: ATC Semitec 104NT-4-R025H42G
sensor_pin: PA6
min_temp: 0
max_temp: 200
[fan]
pin: PC6
@ -163,9 +178,16 @@ heater: extruder
heater_temp: 50.0
fan_speed: 1.0
#[temperature_sensor chamber]
#sensor_type: ATC Semitec 104GT-2
#sensor_pin: PA1
[temperature_sensor raspberry_pi]
sensor_type: temperature_host
min_temp: 10
max_temp: 100
[temperature_sensor mcu_temp]
sensor_type: temperature_mcu
min_temp: 0
max_temp: 100
[mcu]
serial: /dev/serial/by-id/usb-Klipper_stm32f103xe_33FFD8055646303527842243-if00
@ -225,30 +247,7 @@ probe_points:
125,119,20
[input_shaper]
shaper_type_x = zv
shaper_freq_x = 56.0
shaper_type_y: zv
shaper_freq_y: 47.2
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# -0.009375, 0.000000, 0.015625
#*# -0.031250, -0.012500, -0.006250
#*# -0.025000, -0.031250, -0.025000
#*# tension = 0.2
#*# min_x = 89.2
#*# algo = lagrange
#*# y_count = 3
#*# mesh_y_pps = 2
#*# min_y = 81.7
#*# x_count = 3
#*# max_y = 148.3
#*# mesh_x_pps = 2
#*# max_x = 155.8
#*#
#*# [probe]
#*# z_offset = 6.100
shaper_type_x = mzv
shaper_freq_x = 54.0
shaper_type_y = mzv
shaper_freq_y = 48.8