[printer Vz.44]
use_Dpms: False
titlebar_items: MCU

[main]
theme = vzbot-theme-BlackCF
print_estimate_method = file
screen_blanking = 300
font_size = small
use_dpms = False

[displayed_macros Printer]
bed_mesh_calibrate = False
flow_calibration = False
get_timelapse_setup = False
hyperlapse = False
print_start = False
print_end = False
sensorless_home_y = False
heatsoak = False
test_speed = False
safe_unretract = False
m600 = False
safe_retract = False
sensorless_home_x = False
test_stream_delay = False
timelapse_render = False
timelapse_take_frame = False

[preheat ABS]
bed = 110
extruder = 200

[preheat ASA]
bed = 95
extruder = 190

[preheat PLA]
bed = 55
extruder = 175
#~# --- Do not edit below this line. This section is auto generated --- #~#

#~#
#~# [main]
#~# theme = vzbot-theme-BlackCF
#~# print_estimate_method = slicer
#~# screen_blanking = 3600
#~# font_size = small
#~# use_dpms = False
#~# 
#~# [displayed_macros Printer]
#~# bed_mesh_calibrate = False
#~# flow_calibration = False
#~# get_timelapse_setup = False
#~# hyperlapse = False
#~# print_start = False
#~# print_end = False
#~# sensorless_home_y = False
#~# heatsoak = False
#~# test_speed = False
#~# safe_unretract = False
#~# m600 = False
#~# safe_retract = False
#~# sensorless_home_x = False
#~# test_stream_delay = False
#~# timelapse_render = False
#~# timelapse_take_frame = False
#~# 
#~# [displayed_macros Vz.44]
#~# cancel_print = False
#~# bed_mesh_calibrate = False
#~# disable_motors = False
#~# flow_calibration = False
#~# get_timelapse_setup = False
#~# hyperlapse = False
#~# pause = False
#~# print_start = False
#~# print_end = False
#~# sensorless_home_y = False
#~# resume = False
#~# heatsoak = False
#~# test_speed = False
#~# safe_unretract = False
#~# m600 = False
#~# safe_retract = False
#~# test_z_up_middle = False
#~# sensorless_home_x = False
#~# test_stream_delay = False
#~# test_z_down = False
#~# timelapse_render = False
#~# timelapse_take_frame = False
#~# test_z_down_middle = False
#~# test_z_up = False
#~#