[include Adaptive_Mesh.cfg]

[bed_screws]
screw1: 12,0
screw2: 12,287
screw3: 312,287
screw4: 312,0

[screws_tilt_adjust]
screw1: 0, 0
screw1_name: front left screw
screw2: 294, 0
screw2_name: front right screw
screw3: 294, 226
screw3_name: rear right screw
screw4: 0, 226
screw4_name: rear left screw
horizontal_move_z: 20
speed: 500
screw_thread: CCW-M3

[dockable_probe]
pin: PF7
x_offset: 3
y_offset: 12.6
z_offset: 4.765
samples: 3
sample_retract_dist: 3
samples_result: median
samples_tolerance: 0.04
samples_tolerance_retries: 3
speed: 5
lift_speed: 20

dock_position: 5,316,20
approach_position: 5,287,20
detach_position: 35,316,20
attach_speed: 30
detach_speed: 30
travel_speed: 500
check_open_attach: True
dock_fixed_z: True
dock_retries: 3
allow_delayed_detach: True

[z_calibration]
nozzle_xy_position: 327.5,226
switch_xy_position: 320,210
bed_xy_position: 150,150
switch_offset: 0.
switch_offset: 0.43 # Lower number is farther from bed
speed: 300
samples: 3
samples_result: median
samples_tolerance: 0.04
samples_tolerance_retries: 3
lift_speed: 20
start_gcode: ATTACH_PROBE
end_gcode: DETACH_PROBE

[bed_mesh]
speed: 500
horizontal_move_z: 7
mesh_min: 20, 20
mesh_max: 320, 282
probe_count: 6, 6
algorithm: bicubic
fade_start: 1
fade_end: 10
fade_target: 0