fix: update flake, edit post

content/peraxis.md

@@ -234,7 +234,7 @@ described above in the start gcode section of the slicer.
 In your `PRINT_END` macro (or End Gcode section in the slicer if you don't have
 a `PRINT_END` macro, add this line. 
 
-`SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}`
+`SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel}`
 
 You won't ever have to change it, it simply
 restores your printers limits set in the config. You very likely also want to

flake.lock

@@ -5,11 +5,11 @@
         "systems": "systems"
       },
       "locked": {
-        "lastModified": 1701680307,
-        "narHash": "sha256-kAuep2h5ajznlPMD9rnQyffWG8EM/C73lejGofXvdM8=",
+        "lastModified": 1710146030,
+        "narHash": "sha256-SZ5L6eA7HJ/nmkzGG7/ISclqe6oZdOZTNoesiInkXPQ=",
         "owner": "numtide",
         "repo": "flake-utils",
-        "rev": "4022d587cbbfd70fe950c1e2083a02621806a725",
+        "rev": "b1d9ab70662946ef0850d488da1c9019f3a9752a",
         "type": "github"
       },
       "original": {
@@ -20,11 +20,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1704842529,
-        "narHash": "sha256-OTeQA+F8d/Evad33JMfuXC89VMetQbsU4qcaePchGr4=",
+        "lastModified": 1716451822,
+        "narHash": "sha256-0lT5RVelqN+dgXWWneXvV5ufSksW0r0TDQi8O6U2+o8=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "eabe8d3eface69f5bb16c18f8662a702f50c20d5",
+        "rev": "3305b2b25e4ae4baee872346eae133cf6f611783",
         "type": "github"
       },
       "original": {