Update pins and make klipper not complain

fans.cfg

@@ -1,45 +1,22 @@
 [fan]
-##	Print Cooling Fan - FAN2 Connector
+##	Print Cooling Fan - FAN0 Connector
-pin: PA2
+pin: PA8
 max_power: 1
 kick_start_time: 0.5
 off_below: 0.10
 
 [heater_fan hotend_fan]
-##	Hotend Fan - FAN0 Connector
+##	Hotend Fan - FAN1 Connector
-pin: PA0
+pin: PE5
 max_power: 1.0
 kick_start_time: 0.5
 heater: extruder
 heater_temp: 50.0
 
-[fan_generic Exhaust_fan]
-##  exhaust fan - In FAN4
-pin: PA15
-max_power: 1
-shutdown_speed: 0
-kick_start_time: 0.1
-off_below: 0.10
-
-[fan_generic chamber_fan]
-##  chamber fan - In FAN9 Positon
-pin: PD15
-max_power: 1
-shutdown_speed: 0
-kick_start_time: 0.1
-off_below: 0.10
-
-[fan_generic RSCS]
-##  RSCS Fans - In FAN1 Positon
-pin: PA1
-max_power: 1
-shutdown_speed: 0
-kick_start_time: 0.1
-off_below: 0.10
-
 [controller_fan driver_fan]
+##	Controller Fan - FAN2 Connector
 stepper: stepper_x
-pin: PB11
+pin: PD12
 max_power: 1
 shutdown_speed: 0
 kick_start_time: 0.1

moonraker.conf

@@ -56,3 +56,11 @@ path: ~/fluidd
 #env: /home/kdb424/.KlipperScreen-env/bin/python
 #requirements: scripts/KlipperScreen-requirements.txt
 #install_script: scripts/KlipperScreen-install.sh
+
+# moonraker.conf
+
+[update_manager timelapse]
+type: git_repo
+primary_branch: main
+path: ~/moonraker-timelapse
+origin: https://github.com/mainsail-crew/moonraker-timelapse.git

printer.cfg

@@ -1,10 +1,11 @@
+[include timelapse.cfg]
 [include kiauh_macros.cfg]
 [include steppers.cfg]
 [include stepper2209.cfg]
 [include stepperz.cfg]
 [include sherpa_mini.cfg]
 [include fans.cfg]
-[include calibration_mcros.cfg]
+[include calibration_macros.cfg]
 
 [pause_resume]
 [display_status]
@@ -14,7 +15,8 @@ path: ~/gcode_files
 [printer]
 kinematics: corexy
 max_velocity: 2000
-max_accel: 50000
+max_accel: 5000
+#max_accel: 50000
 #max_accel_to_decel: 100000
 max_z_velocity: 30
 max_z_accel: 1500
@@ -24,9 +26,9 @@ square_corner_velocity: 20
 serial: /dev/serial/by-id/<your-mcu-id>
 
 [heater_bed]
-heater_pin: PE5
+heater_pin: PA6
 sensor_type: Generic 3950
-sensor_pin: PC1
+sensor_pin: PF3
 control: pid
 pid_Kp: 66.746
 pid_Ki: 3.504

sherpa_mini.cfg

@@ -6,14 +6,32 @@ gear_ratio: 50:8 #for sherpa mini 8t motor
 microsteps: 16
 full_steps_per_rotation: 200 #1.8deg Motor
 
+nozzle_diameter: 0.5
+filament_diameter: 1.750
+
 max_extrude_only_distance: 1400.0
 max_extrude_only_velocity: 75.0
 max_extrude_only_accel: 1500
 
+min_temp: 180
+max_temp: 350
+
+step_pin: PG4
+dir_pin: PC1
+enable_pin: !PA0
+heater_pin: PA2
+sensor_type: PT1000
+sensor_pin: PF4
+
+control: pid
+pid_Kp = 27.55
+pid_Ki = 1.275
+pid_Kd = 148.759
+
 #settings for NEMA14 Stepper
 [tmc2209 extruder]
 interpolate: True
-
+uart_pin: PC7
 #Run current is listed in RMS
 run_current: 0.30 #min current, equivalent to 0.42A peak (Peak = RMS/0.707)
 #run_current: 0.35 #max current, equivalent to 0.49A peak (Peak = RMS/0.707)

stepper2209.cfg

@@ -7,7 +7,7 @@ sense_resistor: 0.110
 stealthchop_threshold: 0
 
 [tmc2209 stepper_y]
-uart_pin: PF12
+uart_pin: PD11
 interpolate: true
 run_current: 1.7
 hold_current: 1

steppers.cfg

@@ -1,11 +1,11 @@
 
 [stepper_x]
-step_pin: PE2  # Drive0
+step_pin: PF13  # Drive0
-dir_pin: PC5
+dir_pin: PF12
-enable_pin: !PF11
+enable_pin: !PF14
 microsteps: 16
 rotation_distance: 40
-endstop_pin: PG11
+endstop_pin: PG6
 position_endstop: -8
 position_min: -8
 position_max: 315
@@ -16,12 +16,12 @@ homing_positive_dir: false
 step_pulse_duration: 0.000001
 
 [stepper_y]
-step_pin: PE3  # Drive1
+step_pin: PG0  # Drive1
-dir_pin: PF13
+dir_pin: PG1
-enable_pin: !PF14
+enable_pin: !PF15
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^PG12
+endstop_pin: PG9
 position_endstop: -6
 position_min: -6
 position_max: 315
@@ -32,9 +32,9 @@ homing_positive_dir: false
 step_pulse_duration: 0.000001
 
 [stepper_z]
-step_pin: PE15
+step_pin: PF11
-dir_pin: !PE11
+dir_pin: !PG3
-enable_pin: !PF2
+enable_pin: !PG5
 microsteps: 16
 rotation_distance: 4
 endstop_pin: !PG10

stepperz.cfg

@@ -1,6 +1,6 @@
 [tmc2209 stepper_z]
 interpolate: false
-uart_pin: PE10
+uart_pin: PC6
 run_current: 0.8
 hold_current: 0.8
 sense_resistor: 0.110

timelapse.cfg

@@ -0,0 +1 @@
+/home/kdb424/moonraker-timelapse/klipper_macro/timelapse.cfg